Features & Applications
Features
|
Applications
|
Detailed Description MG10XUF
MG10XUF is a Yamaha MG 10-channel analog mixer with 4 microphone inputs, stereo source connections and built-in SPX effects. Linear faders provide channel and master-level control. The available mono, mono/stereo and stereo channels are itemized in the specifications.
D-PRE microphone preamps, phantom power and channel EQ support microphone and line-level sources. One-knob compression is provided on selected channels, while auxiliary and monitoring connections support the model’s routing options. Balanced main outputs and headphone monitoring connect the mixer to a sound system or local listening setup.
The two-input / two-output USB interface supports 24-bit audio at sample rates up to 192 kHz. It transfers a stereo mix rather than recording every input independently. Typical applications include rehearsals, small performances, speech and compact recording systems. Use the model-specific input, output and level tables when choosing cables and connected equipment.
Manufacturer documents: Series brochure · Manufacturer specifications
Technical Specifications MG10XUF
Outline |
|
|---|---|
| MIXING CAPABILITY / ON-BOARD PROCESSORS | SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) |
| I/O / PHANTOM POWER | +48 V |
| I/O / DIGITAL I/O | USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit |
| INPUT CHANNELS / MONO[MIC/LINE] | 4 |
| INPUT CHANNELS / MONO/STEREO[MIC/LINE] | – |
| INPUT CHANNELS / STEREO[LINE] | 3 |
| OUTPUT CHANNELS / STEREO OUT | 2 |
| OUTPUT CHANNELS / MONITOR OUT | 1 |
| OUTPUT CHANNELS / PHONES | 1 |
| OUTPUT CHANNELS / AUX SEND | 1 |
| OUTPUT CHANNELS / GROUP OUT | – |
| BUS | Stereo: 1, AUX[FX]: 1 |
| INPUT CHANNEL FUNCTION / PAD | 26 dB (Mono) |
| INPUT CHANNEL FUNCTION / HPF | 80 Hz, 12 dB/oct (Mono) |
| INPUT CHANNEL FUNCTION / COMP | 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec |
| INPUT CHANNEL FUNCTION / EQ HIGH | Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving |
| INPUT CHANNEL FUNCTION / EQ MID | Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking |
| INPUT CHANNEL FUNCTION / EQ LOW | Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving |
| INPUT CHANNEL FUNCTION / PEAK LED | LED turns on when post EQ signal reaches 3 dB below clipping |
| INPUT CHANNEL FUNCTION / LEVEL METER | 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] |
General specifications |
|
| TOTAL HARMONIC DISTORTION | 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min |
| FREQUENCY RESPONSE | +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min |
| HUM & NOISE LEVEL / EQUIVALENT INPUT NOISE | -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) |
| HUM & NOISE LEVEL / RESIDUAL OUTPUT NOISE | -102 dBu (STEREO OUT, STEREO master fader: Min) |
| CROSSTALK | -83 dB |
| POWER REQUIREMENTS | PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha |
| POWER CONSUMPTION | 22.9 W |
| DIMENSIONS / W | 275 mm (10.8") |
| DIMENSIONS / H | 110 mm (4.3") |
| DIMENSIONS / D | 390 mm (15.4") |
| NET WEIGHT | 3.3 kg (7.3 lbs) |
| ACCESSORIES | Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Foot Switch FC5 |
| OTHERS | Operating Temperature: 0 to +40˚C |
Reviews
There are no reviews yet.