Features & Applications
Features
|
Applications
|
Detailed Description MG06X
MG06X is a Yamaha MG 6-channel analog mixer with 2 microphone inputs, stereo source connections and built-in SPX effects. Rotary channel controls keep the operating layout compact. The available mono, mono/stereo and stereo channels are itemized in the specifications.
D-PRE microphone preamps, phantom power and channel EQ support microphone and line-level sources. MG06X provides two-band EQ on its microphone channels and six effect programs; it does not have a USB audio interface. Balanced main outputs and headphone monitoring connect the mixer to a sound system or local listening setup.
Its small format suits portable setups where simple analog mixing and onboard effects are needed without computer connectivity. Typical applications include rehearsals, small performances, speech and compact recording systems. Use the model-specific input, output and level tables when choosing cables and connected equipment.
Manufacturer documents: Technical specifications · Series brochure · Manufacturer specifications
Technical Specifications MG06X
Outline |
|
|---|---|
| MIXING CAPABILITY / ON-BOARD PROCESSORS | SPX algorithm: 6 programs |
| I/O / PHANTOM POWER | +48 V |
| I/O / DIGITAL I/O | – |
| INPUT CHANNELS / MONO[MIC/LINE] | 2 |
| INPUT CHANNELS / MONO/STEREO[MIC/LINE] | – |
| INPUT CHANNELS / STEREO[LINE] | 2 |
| OUTPUT CHANNELS / STEREO OUT | 2 |
| OUTPUT CHANNELS / MONITOR OUT | – |
| OUTPUT CHANNELS / PHONES | 1 |
| OUTPUT CHANNELS / AUX SEND | – |
| OUTPUT CHANNELS / GROUP OUT | – |
| BUS | Stereo: 1 |
| INPUT CHANNEL FUNCTION / PAD | 26 dB (Mono) |
| INPUT CHANNEL FUNCTION / HPF | 80 Hz, 12 dB/oct (Mono) |
| INPUT CHANNEL FUNCTION / COMP | – |
| INPUT CHANNEL FUNCTION / EQ HIGH | (Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving |
| INPUT CHANNEL FUNCTION / EQ MID | – |
| INPUT CHANNEL FUNCTION / EQ LOW | (Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving |
| INPUT CHANNEL FUNCTION / PEAK LED | LED turns on when post EQ signal reaches 3 dB below clipping |
| INPUT CHANNEL FUNCTION / LEVEL METER | 2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB] |
General specifications |
|
| TOTAL HARMONIC DISTORTION | 0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min |
| FREQUENCY RESPONSE | +0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min |
| HUM & NOISE LEVEL / EQUIVALENT INPUT NOISE | -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) |
| HUM & NOISE LEVEL / RESIDUAL OUTPUT NOISE | -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) |
| CROSSTALK | -88 dB |
| POWER REQUIREMENTS | PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha |
| POWER CONSUMPTION | 12 W |
| DIMENSIONS / W | 149 mm (5.9″) |
| DIMENSIONS / H | 62 mm (2.4″) |
| DIMENSIONS / D | 202 mm (7.9″) |
| NET WEIGHT | 0.9 kg (1.98 lbs.) |
| ACCESSORIES | Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A |
| OTHERS | Operating Temperature: 0 to +40˚C |
MG06X/06 Analog Input Characteristics |
|
| MIC/LINE 1/L, 2/R | PAD 26 dB: OFF; GAIN Trim Position: +64 dB; Actual Load Impedance: 3kΩ; For Use With Nominal: 50-600Ω Mics/Lines; Input Level / Sensitivity *1: -72 dBu (0.195 mV); Input Level / Nominal: -60 dBu (0.775 mV); Input Level / Max. before clip: -46 dBu (3.884 mV); Connector: Combo jack *2 (Balanced) |
| MIC/LINE 1/L, 2/R | PAD 26 dB: OFF; GAIN Trim Position: +20 dB; Actual Load Impedance: 3kΩ; For Use With Nominal: 50-600Ω Mics/Lines; Input Level / Sensitivity *1: -28 dBu (30.9 mV); Input Level / Nominal: -16 dBu (122.8 mV); Input Level / Max. before clip: -2 dBu (615.6 mV); Connector: Combo jack *2 (Balanced) |
| MIC/LINE 1/L, 2/R | PAD 26 dB: ON; GAIN Trim Position: +38 dB; Actual Load Impedance: 3kΩ; For Use With Nominal: 50-600Ω Mics/Lines; Input Level / Sensitivity *1: -46 dBu (3.884 mV); Input Level / Nominal: -34 dBu (15.46 mV); Input Level / Max. before clip: -20 dBu (77.5 mV); Connector: Combo jack *2 (Balanced) |
| MIC/LINE 1/L, 2/R | PAD 26 dB: ON; GAIN Trim Position: -6 dB; Actual Load Impedance: 3kΩ; For Use With Nominal: 50-600Ω Mics/Lines; Input Level / Sensitivity *1: -2 dBu (615.6 mV); Input Level / Nominal: +10 dBu (2.451 V); Input Level / Max. before clip: +24 dBu (12.283 V); Connector: Combo jack *2 (Balanced) |
| LINE 3/4, 5/6 | PAD 26 dB: -; GAIN Trim Position: -; Actual Load Impedance: 10kΩ; For Use With Nominal: 600Ω Lines; Input Level / Sensitivity *1: -22 dBu (61.56 mV); Input Level / Nominal: -10 dBu (245.1 mV); Input Level / Max. before clip: +4 dBu (1.228 V); Connector: Phone jack *5 RCA Pin (Unbalanced) |
MG06X/06 Analog Output Characteristics |
|
| STEREO OUT [L, R] | Actual Source Impedance: 75Ω; For Use With Nominal: 10kΩ Lines; Output Level / Nominal: +4 dBu (1.228 V); Output Level / Max. before clip: +18 dBu (6.156 V); Connector: XLR-3-32 *3 Phone jack *4 (Balanced) |
| PHONES | Actual Source Impedance: 33Ω; For Use With Nominal: 40Ω Phones; Output Level / Nominal: 2.4mW + 2.4mW; Output Level / Max. before clip: 24mW + 24mW; Connector: Stereo phone jack |
Reviews
There are no reviews yet.