Features & Applications
Features
|
Applications
|
Detailed Description Arcline 8
Arcline 8 combines two horn-loaded 8-inch LF drivers, two 8-inch mid drivers with phase devices and two 1.4-inch compression drivers. The three-way system uses separate LF and MHF amplifier sections, each rated at 500 W AES. A 110° horizontal pattern and nominal 12° vertical coverage provide the basis for scalable line-array design.
The rigging angle is selected before the enclosures are lifted, helping to organise deployment on site. Ground-stacked configurations are also supported. Dual 4-pin locking connectors provide input and link connections, and the 15 mm multi-laminate plywood enclosure uses a TourCoat finish. The datasheet specifies response separately for a single enclosure and a three-enclosure array.
Explore the Arcline range from Void Acoustics at B-Star. Technical references: Arcline 8 datasheet, product brochure and user guide.
Product Images Arcline 8
Technical Specifications Arcline 8
| ACOUSTICS | |
|---|---|
| FREQUENCY RESPONSE | 110 Hz–20 kHz, single enclosure; 90 Hz–20 kHz, three enclosures |
| MAXIMUM OUTPUT (CALCULATED) | 132 dB continuous, 138 dB peak |
| EFFICIENCY (HALF SPACE) | LF: 100 dB; MHF: 106 dB, 1 W/1 m |
| NOMINAL DISPERSION | 110°H × 12°V |
| DRIVER CONFIGURATION | 2 × 1.4-inch compression drivers; 2 × 8-inch mid drivers with phase device; 2 × 8-inch horn-loaded LF drivers |
| POWER HANDLING | LF: 500 W AES; MHF: 500 W AES |
| NOMINAL IMPEDANCE | 2 × 16 Ω |
| DSP | |
| PROTECTION | Internal electronic control |
| CONNECTIONS | |
| CONNECTIONS | 2 × 4-pin locking connector |
| MECHANICAL | |
| ENCLOSURE | 15 mm multi-laminate plywood |
| FINISH | Textured TourCoat polyurea |
| RIGGING | Angles selected before lifting; ground-stackable |
| GRILLE | Perforated steel with foam filter |
| WEIGHT | 39 kg |
Maximum output is calculated. Sensitivity or efficiency is measured in half space. Power handling is AES2-1984 compliant.
Reviews
There are no reviews yet.