Features & Applications
Features
- Two-channel Class A/B amplifier
- 700 W per channel at 4 Ω
- 1400 W bridged at 8 Ω
- Stereo, Parallel and Bridge operating modes
- Balanced XLR/¼-inch combi inputs; speakON / binding-post outputs
- 2U chassis with front-panel channel indicators
|
Applications
- Restaurants, cafés and bars
- Hotels and hospitality spaces
- Retail and commercial installations
|
Detailed Description Amp 200
Amp 200 is a two-channel performance amplifier for installed Optimal Audio systems. Its Class A/B design delivers 700 W per channel into 4 Ω. For a suitable single loudspeaker load, bridge mode provides 1400 W into 8 Ω; Stereo and Parallel modes are also selectable from the rear panel.
The input section uses balanced XLR and quarter-inch jack combi connectors. Loudspeakers connect through speakON sockets or 4 mm binding posts. Front-panel LEDs provide a view of each channel’s status, while fan cooling supports operation in the rack.
Pair Amp 200 with a Zone processor when the system requires Optimal Audio loudspeaker presets and limiters. WebApp provides access to this processing and to system control. Choose the amplifier’s 120 V or 230 V variant to match the mains supply specified for the installation.
Explore the Optimal Audio range at B-Star. Technical reference: Amp 200 datasheet and the Optimal Audio brochure.
Technical Specifications Amp 200
AMPLIFIER
|
| TYPE |
CLASS AB power amplifier |
| POWER OUTPUT (4Ω-16Ω) |
4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W |
| ANALOGUE IN/LINK |
Jack/XLR combo inputs |
| SIGNAL TO NOISE RATIO |
104dB |
| FREQUENCY RESPONSE |
20-20k, +0, -0.5dB |
| TOTAL HARMONIC DISTORTION |
<0.03% @ 1W |
| SLEW RATE |
9.31V/us, 8 ohm load |
| DAMPING FACTOR |
>400, 8ohm load |
POWER & COOLING
|
| COOLING |
Force air cooling with fan |
| MAINS POWER INPUT |
120V, 230V variants |
| MAINS CONNECTOR |
IEC |
CONNECTIONS
|
| ANALOGUE INPUT IMPEDANCE |
7.5kOhms unbalanced, 15kOhms balanced |
| MAXIMUM ANALOGUE INPUT LEVEL |
+20dBu |
| AMPLIFIER OUTPUTS |
Speakon / 4mm binding posts |
DIMENSIONS & WEIGHT
|
| DIMENSIONS |
(W) 482mm x (H) 88mm x (D) 426mm |
| WEIGHT |
17.06kg (37.61lbs) |
ACCESSORIES & SYSTEM MATCHING
|
| ACCESSORIES |
Rear rack support |
Reviews
There are no reviews yet.