Up 4 is a two-way passive ceiling speaker with a 4-inch LF driver, silk-dome tweeter and steel back can. It handles 30 W AES and offers 120° conical coverage for music and speech.
Up 4 combines a 4-inch coated-paper LF driver with a 0.7-inch silk-dome tweeter in a ceiling speaker with a steel back can. Its 120° conical coverage pattern supports music and speech reproduction in commercial interiors. Integrated fixings secure the assembly in the ceiling.
Rated power handling is 30 W AES, with an 8 Ω setting and selectable transformer taps for 70 V and 100 V lines. The tap control is accessible behind the removable grille. The specified preset gives a frequency response of 100 Hz–18 kHz within ±3 dB.
The speaker can use Grille 1 for a bezel-less appearance or Pendant 1 for suspended installation. Check the ceiling dimensions and supplied accessories in the specification table. The selected amplifier should provide the supported loudspeaker processing, including the recommended 90 Hz high-pass filter.
Up 4 combines a 4-inch coated-paper LF driver with a 0.7-inch silk-dome tweeter in a ceiling speaker with a steel back can. Its 120° conical coverage pattern supports music and speech reproduction in commercial interiors. Integrated fixings secure the assembly in the ceiling.
Rated power handling is 30 W AES, with an 8 Ω setting and selectable transformer taps for 70 V and 100 V lines. The tap control is accessible behind the removable grille. The specified preset gives a frequency response of 100 Hz–18 kHz within ±3 dB.
The speaker can use Grille 1 for a bezel-less appearance or Pendant 1 for suspended installation. Check the ceiling dimensions and supplied accessories in the specification table. The selected amplifier should provide the supported loudspeaker processing, including the recommended 90 Hz high-pass filter.
Cuboid 3TX adds a 70/100 V transformer to the compact Cuboid 3 format. Its 3.5-inch LF and 0.5-inch HF drivers support distributed music and speech, with an 8 Ω operating option.
SmartAmp 10 is a two-channel Class D amplifier with onboard loudspeaker EQ and limiter presets. Its two nominal 125 W channels share up to 250 W and support low-impedance or 70/100 V systems.
ZonePad VL1 is a wall-mounted volume controller for Optimal Audio SmartAmp amplifiers. It connects directly to GPIO and provides local level adjustment without a separate power supply.
Reviews
There are no reviews yet.