CDD6
CDD6
Back to products
CDD8
CDD8

CDD6TX-WR

The Martin Audio CDD6TX-WR is a 6.5-inch passive Coaxial Differential Dispersion loudspeaker with a 70/100 V transformer. Its weatherised format suits sheltered outdoor installations.

BROCHURE DATA SHEET

Features and Applications

Features

  • Compact passive two-way CDD system.
  • Coaxial Differential Dispersion technology.
  • Composite architectural enclosure.
  • User-rotatable coaxial driver.
  • Portrait or landscape mounting.
  • Screw-free water- and particle-resistant grille.
  • Sheltered outdoor operation.
  • −20°C to +70°C published temperature range.
  • IP54 environmental testing.
  • 8-ohm nominal impedance in the specified low-impedance configuration.
  • 70/100 V line transformer.
  • Compatible discreet weatherised mounting accessories.
  • Black or white standard finish; custom RAL colours.

Applications

  • Bars and Restaurants
  • Museums and AV spaces
  • Convention Centres
  • Hotels
  • Retail Outlets
  • Leisure Centres
  • Houses of Worship
  • Outdoor Restaurants, Bars, Hotel areas
  • Nearfield Systems in Outdoor Stadia
  • Transport Hubs
  • Concourses and Theme Parks

Product Details CDD6TX-WR

CDD6TX-WR is a weatherised passive two-way Coaxial Differential Dispersion loudspeaker. The small enclosure provides full-frequency reproduction for discreet architectural reinforcement. It can also act as a fill beside larger CDD models, with an SX subwoofer available for higher-level music systems.

A 6.5-inch LF driver and dome HF section operate in a compact composite enclosure. The driver combines the two frequency sections around a common acoustic axis.

Coaxial Differential Dispersion provides wider horizontal coverage nearby and directs proportionally more energy towards the rear of the audience. LF and HF outputs combine as a point source, reducing the off-axis response changes around crossover associated with separated drivers.

A static HF waveguide merges with the shaped LF cone to maintain the intended pattern into the upper frequency range. This also addresses the high-frequency beaming that can occur in conventional coaxial arrangements.

The driver rotates for portrait or landscape operation after removing the screw-free grille. The curved composite cabinet accepts compatible wall and ceiling mounting accessories. Standard finishes are black RAL9005 or white RAL9016, with other RAL colours offered to order.

The weatherised design is intended for outdoor locations sheltered from direct exposure to the elements. It is tested to IP54 and for operation from −20°C to +70°C. The protective grille uses zinc-plated mild steel with a powder-coated finish to resist water and particles. A dual cable gland permits cabinet-to-cabinet wiring without an external breakout box.

The internal 70/100 V transformer supports distributed circuits and daisy-chained loudspeakers. Use the model-specific transformer settings and connections published in the technical data.

A compatible system controller supplies the correct equalisation and limiter settings for protection. DX4.0 or iKON provides enhanced DSP and FIR-based presets for the system; the passive loudspeaker requires suitable external amplification.

Explore the Martin Audio CDD and CDD-WR loudspeakers at B-Star for the available system options.

Technical Specifications CDD6TX-WR

ACOUSTICS
TYPE Ultra-compact passive two-way Coaxial Differential Dispersion system
FREQUENCY RESPONSE (5) 80Hz-20kHz ± 3dB -10dB @ 70Hz
DRIVERS LF: 6.5” (165mm)/1.5” (38mm) voice coil, long excursion, ferrite motor system HF: 1” (25mm) voice coil, fabric dome with neodymium motor system
RATED POWER (2) 150W AES, 600W peak
SENSITIVITY (8) 91dB
MAXIMUM SPL (9) 113dB continuous, 119dB peak 6.2W=99dB, 12.5W=102dB, 25W=105dB, 50W=108dB.
NOMINAL IMPEDANCE 8Ω
DISPERSION AT −6 dB 110°–80° horizontal, 80° vertical (user-rotatable)
CROSSOVER 2.5kHz passive

70/100 V TRANSFORMER
TRANSFORMER SETTINGS 100V line: 12.5W, 25W, 50W 70V line: 6.5W, 12.5W, 25W, 50W

CONNECTIONS
CONNECTORS Low-profile 13A push-lock connector; weatherproof input-panel cover with dual cable glands
PIN CONNECTIONS Left to right: Input+, Input -, Link -, Link +

ENCLOSURE, MOUNTING AND ENVIRONMENT
ENCLOSURE 9 litre, composite material
FINISH Black or white as standard
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish and weatherised backing
FITTINGS 4 x M6 inserts for wall/ceiling brackets
ENVIRONMENTAL Rated at IP54

DIMENSIONS AND WEIGHT
DIMENSIONS (W) 210mm x (H) 325mm x (D) 210mm (W) 8.3ins x (H) 12.8ins x (D) 8.3ins
WEIGHT 6.77kg (14.93lbs)
CONTACT CONSULTING

CÁC SẢN PHẨM KHÁC

Description

Features and Applications

Features

  • Compact passive two-way CDD system.
  • Coaxial Differential Dispersion technology.
  • Composite architectural enclosure.
  • User-rotatable coaxial driver.
  • Portrait or landscape mounting.
  • Screw-free water- and particle-resistant grille.
  • Sheltered outdoor operation.
  • −20°C to +70°C published temperature range.
  • IP54 environmental testing.
  • 8-ohm nominal impedance in the specified low-impedance configuration.
  • 70/100 V line transformer.
  • Compatible discreet weatherised mounting accessories.
  • Black or white standard finish; custom RAL colours.

Applications

  • Bars and Restaurants
  • Museums and AV spaces
  • Convention Centres
  • Hotels
  • Retail Outlets
  • Leisure Centres
  • Houses of Worship
  • Outdoor Restaurants, Bars, Hotel areas
  • Nearfield Systems in Outdoor Stadia
  • Transport Hubs
  • Concourses and Theme Parks

Product Details CDD6TX-WR

CDD6TX-WR is a weatherised passive two-way Coaxial Differential Dispersion loudspeaker. The small enclosure provides full-frequency reproduction for discreet architectural reinforcement. It can also act as a fill beside larger CDD models, with an SX subwoofer available for higher-level music systems.

A 6.5-inch LF driver and dome HF section operate in a compact composite enclosure. The driver combines the two frequency sections around a common acoustic axis.

Coaxial Differential Dispersion provides wider horizontal coverage nearby and directs proportionally more energy towards the rear of the audience. LF and HF outputs combine as a point source, reducing the off-axis response changes around crossover associated with separated drivers.

A static HF waveguide merges with the shaped LF cone to maintain the intended pattern into the upper frequency range. This also addresses the high-frequency beaming that can occur in conventional coaxial arrangements.

The driver rotates for portrait or landscape operation after removing the screw-free grille. The curved composite cabinet accepts compatible wall and ceiling mounting accessories. Standard finishes are black RAL9005 or white RAL9016, with other RAL colours offered to order.

The weatherised design is intended for outdoor locations sheltered from direct exposure to the elements. It is tested to IP54 and for operation from −20°C to +70°C. The protective grille uses zinc-plated mild steel with a powder-coated finish to resist water and particles. A dual cable gland permits cabinet-to-cabinet wiring without an external breakout box.

The internal 70/100 V transformer supports distributed circuits and daisy-chained loudspeakers. Use the model-specific transformer settings and connections published in the technical data.

A compatible system controller supplies the correct equalisation and limiter settings for protection. DX4.0 or iKON provides enhanced DSP and FIR-based presets for the system; the passive loudspeaker requires suitable external amplification.

Explore the Martin Audio CDD and CDD-WR loudspeakers at B-Star for the available system options.

Technical Specifications CDD6TX-WR

ACOUSTICS
TYPE Ultra-compact passive two-way Coaxial Differential Dispersion system
FREQUENCY RESPONSE (5) 80Hz-20kHz ± 3dB -10dB @ 70Hz
DRIVERS LF: 6.5” (165mm)/1.5” (38mm) voice coil, long excursion, ferrite motor system HF: 1” (25mm) voice coil, fabric dome with neodymium motor system
RATED POWER (2) 150W AES, 600W peak
SENSITIVITY (8) 91dB
MAXIMUM SPL (9) 113dB continuous, 119dB peak 6.2W=99dB, 12.5W=102dB, 25W=105dB, 50W=108dB.
NOMINAL IMPEDANCE 8Ω
DISPERSION AT −6 dB 110°–80° horizontal, 80° vertical (user-rotatable)
CROSSOVER 2.5kHz passive

70/100 V TRANSFORMER
TRANSFORMER SETTINGS 100V line: 12.5W, 25W, 50W 70V line: 6.5W, 12.5W, 25W, 50W

CONNECTIONS
CONNECTORS Low-profile 13A push-lock connector; weatherproof input-panel cover with dual cable glands
PIN CONNECTIONS Left to right: Input+, Input -, Link -, Link +

ENCLOSURE, MOUNTING AND ENVIRONMENT
ENCLOSURE 9 litre, composite material
FINISH Black or white as standard
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish and weatherised backing
FITTINGS 4 x M6 inserts for wall/ceiling brackets
ENVIRONMENTAL Rated at IP54

DIMENSIONS AND WEIGHT
DIMENSIONS (W) 210mm x (H) 325mm x (D) 210mm (W) 8.3ins x (H) 12.8ins x (D) 8.3ins
WEIGHT 6.77kg (14.93lbs)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CDD6TX-WR”

Your email address will not be published. Required fields are marked *

Related products

SX118

18” Passive Direct Radiating Subwoofer

Xem thiết bị
The Martin Audio SX118 is a compact passive subwoofer with an 18-inch ferrite-motor driver. Its tour-grade enclosure supports installations and portable systems with external amplification and processing.

T1215

12" Passive, 15° Constant Curvature Array Loudspeaker

Xem thiết bị
The Martin Audio T1215 is a passive TORUS constant-curvature array loudspeaker with a 12-inch LF driver and 15° vertical coverage. Dynamic Horn Flare provides adjustable horizontal directivity.

iK41

4-Channel 6,000W Class D Power Amplifier

Xem thiết bị
The Martin Audio iK41 is an iKON four-channel Class D controller amplifier with integrated DSP, Dante and VU-NET control. It provides a complete amplification and processing platform for compatible Martin Audio systems.