T1230
T1230
Back to products
SX218
SX218

SX115

The Martin Audio SX115 is a compact passive subwoofer with a long-excursion 15-inch driver. It supports installed and portable systems, including specified stacked, suspended and cardioid configurations.

BROCHURE DATA SHEET

Features and Applications

Features

  • Compact direct-radiating subwoofer.
  • One long-excursion 15-inch driver with 4-inch voice coils and water-resistant cones.
  • High-output bass reinforcement.
  • Plywood enclosure with approved suspension points.
  • Four large-area ports to reduce air noise.

Applications

  • Live sound reinforcement for small and medium-size venues
  • Fixed installations in concert halls, theatres and ballrooms
  • Houses of Worship
  • Conference halls and corporate AV events
  • Nightclubs, bars and hotels
  • Retail outlets and leisure centres

Product Details SX115

SX115 is a compact direct-radiating passive subwoofer with a 45–100 Hz ±3 dB operating range. It uses one long-excursion 15-inch driver with 4-inch voice coils, water-resistant cones and triple-roll surrounds. Four large reflex ports improve airflow and reduce turbulence at higher output.

The plywood enclosure has a hardwearing textured finish and a coated steel grille with acoustically transparent fabric backing. Recessed ergonomic handles assist handling. An M20 top plate accepts a compatible loudspeaker pole.

Martin Audio SX115 subwoofer dimensional drawing

Threaded points provide approved eyebolt suspension of one enclosure. Safety points and fittings for side rigging strips also support the manufacturer-approved installed array of up to four cabinets. Locating skids and mating channels allow supported cabinet stacks.

Forward- and rear-facing pairs can provide cardioid operation. Each cabinet uses its own amplifier channel and the dedicated DSP preset for that arrangement.

The standard finish is black. Castors are supplied as an optional accessory pack. A connector-cover accessory provides the manufacturer-specified weather-resistant configuration for outdoor use.

Explore the Martin Audio SX subwoofers at B-Star for the available system options.

Technical Specifications SX115

ACOUSTICS
TYPE Direct radiating subwoofer
CROSSOVER FREQUENCY 100Hz
FREQUENCY RESPONSE — 4π (5) 45Hz – 100Hz ± 3dB, -10dB @ 36Hz
DRIVERS LF: 15” with 4” Voice coil, Ferrite Motor
SENSITIVITY (2.83V 1m half space) 100dB
NOMINAL IMPEDANCE 8 Ohms
RATED POWER AES 800W, PEAK 3200W
MAXIMUM SYSTEM SPL 129 dB continuous, 135 dB peak, 141 dB peak with crest factor 4
DISPERSION Omnidirectional, or cardioid when paired in the specified configuration

CONNECTIONS
CONNECTORS 2 x NL4
PIN CONNECTIONS (INPUT) 1+/1–
PIN CONNECTIONS (LINK) 1+/1− (linked from input 1+/1−), 2+/2− (linked from input 2+/2−)

ENCLOSURE AND MOUNTING
FITTINGS Two skids with mating channels in the top; top-mounted M20 threaded pole-mount plate; two pocket handles; 24 × M10 fixing points; 16 × M8 inserts for optional castors
ACCESSORIES WPMTRIGI/WPMTRIGI-W; SXGRIDI15; T8TRIGI/T8TRIGI-W; FKIT450; WHEELKIT; WRKIT; ASF20071; HTKCT06

DIMENSIONS AND WEIGHT
DIMENSIONS (W) 500mm, (H) 451mm, (D) 678mm (806mm with Casters) (W) 19.69ins, (H) 17.76ins, (D) 26.69ins (31.73ins with Casters)
WEIGHT 36.5kg (80.5lbs)
CONTACT CONSULTING

CÁC SẢN PHẨM KHÁC

Description

Features and Applications

Features

  • Compact direct-radiating subwoofer.
  • One long-excursion 15-inch driver with 4-inch voice coils and water-resistant cones.
  • High-output bass reinforcement.
  • Plywood enclosure with approved suspension points.
  • Four large-area ports to reduce air noise.

Applications

  • Live sound reinforcement for small and medium-size venues
  • Fixed installations in concert halls, theatres and ballrooms
  • Houses of Worship
  • Conference halls and corporate AV events
  • Nightclubs, bars and hotels
  • Retail outlets and leisure centres

Product Details SX115

SX115 is a compact direct-radiating passive subwoofer with a 45–100 Hz ±3 dB operating range. It uses one long-excursion 15-inch driver with 4-inch voice coils, water-resistant cones and triple-roll surrounds. Four large reflex ports improve airflow and reduce turbulence at higher output.

The plywood enclosure has a hardwearing textured finish and a coated steel grille with acoustically transparent fabric backing. Recessed ergonomic handles assist handling. An M20 top plate accepts a compatible loudspeaker pole.

Martin Audio SX115 subwoofer dimensional drawing

Threaded points provide approved eyebolt suspension of one enclosure. Safety points and fittings for side rigging strips also support the manufacturer-approved installed array of up to four cabinets. Locating skids and mating channels allow supported cabinet stacks.

Forward- and rear-facing pairs can provide cardioid operation. Each cabinet uses its own amplifier channel and the dedicated DSP preset for that arrangement.

The standard finish is black. Castors are supplied as an optional accessory pack. A connector-cover accessory provides the manufacturer-specified weather-resistant configuration for outdoor use.

Explore the Martin Audio SX subwoofers at B-Star for the available system options.

Technical Specifications SX115

ACOUSTICS
TYPE Direct radiating subwoofer
CROSSOVER FREQUENCY 100Hz
FREQUENCY RESPONSE — 4π (5) 45Hz – 100Hz ± 3dB, -10dB @ 36Hz
DRIVERS LF: 15” with 4” Voice coil, Ferrite Motor
SENSITIVITY (2.83V 1m half space) 100dB
NOMINAL IMPEDANCE 8 Ohms
RATED POWER AES 800W, PEAK 3200W
MAXIMUM SYSTEM SPL 129 dB continuous, 135 dB peak, 141 dB peak with crest factor 4
DISPERSION Omnidirectional, or cardioid when paired in the specified configuration

CONNECTIONS
CONNECTORS 2 x NL4
PIN CONNECTIONS (INPUT) 1+/1–
PIN CONNECTIONS (LINK) 1+/1− (linked from input 1+/1−), 2+/2− (linked from input 2+/2−)

ENCLOSURE AND MOUNTING
FITTINGS Two skids with mating channels in the top; top-mounted M20 threaded pole-mount plate; two pocket handles; 24 × M10 fixing points; 16 × M8 inserts for optional castors
ACCESSORIES WPMTRIGI/WPMTRIGI-W; SXGRIDI15; T8TRIGI/T8TRIGI-W; FKIT450; WHEELKIT; WRKIT; ASF20071; HTKCT06

DIMENSIONS AND WEIGHT
DIMENSIONS (W) 500mm, (H) 451mm, (D) 678mm (806mm with Casters) (W) 19.69ins, (H) 17.76ins, (D) 26.69ins (31.73ins with Casters)
WEIGHT 36.5kg (80.5lbs)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “SX115”

Your email address will not be published. Required fields are marked *

Related products

Q26

2 x 6" Passive Two-way Portable Column Loudspeaker

Xem thiết bị
The Martin Audio Q26 is a compact passive BlacklineQ column delivering 125 dB peak, or 131 dB peak with crest factor 4. It works independently or with Q210 bass reinforcement.

T1215

12" Passive, 15° Constant Curvature Array Loudspeaker

Xem thiết bị
The Martin Audio T1215 is a passive TORUS constant-curvature array loudspeaker with a 12-inch LF driver and 15° vertical coverage. Dynamic Horn Flare provides adjustable horizontal directivity.

CDD6

6" Passive Coaxial Differential Dispersion, On-Wall

Xem thiết bị
The Martin Audio CDD6 is a 6.5-inch passive Coaxial Differential Dispersion loudspeaker for fixed installations needing controlled, discreet sound reinforcement.